Home>News

Maintenance of hoisting machinery running-in period

Time：2023-08-16

1. The use and maintenance of hoisting machinery during the running-in period

1. Since the hoisting machinery is a special vehicle, the operator should receive training and guidance from the manufacturer, have a full understanding of the structure and performance of the hoisting machinery, and obtain certain operating and maintenance experience before operating the machine. The use and maintenance manual of the lifting machinery product provided by the manufacturer is the necessary information for the operator to operate the equipment. Before operating the machine, be sure to read the use and maintenance manual, and operate and maintain according to the requirements of the manual.

2. Pay attention to the workload during the running-in period. Generally, the workload during the running-in period should not exceed 80% of the rated workload, and an appropriate workload should be arranged to prevent the occurrence of overheating caused by the long-term continuous operation of the lifting machinery.

3. Pay attention to frequently observe the indications of the instruments. If there is any abnormality, stop the machine in time to eliminate it. Before the cause is found and the fault is not eliminated, the operation should be stopped.

4. Pay attention to frequently check the level and quality of lubricating oil, hydraulic oil, coolant, brake fluid and fuel oil (water), and pay attention to check the tightness of the whole machine. During the inspection, it is found that there is too much lack of oil and water, and the reason should be analyzed. At the same time, the lubrication of each lubrication point should be strengthened. It is recommended that during the running-in period, grease should be added to the lubrication points every shift.

5. Keep the lifting machinery clean, adjust and tighten loose parts in time to prevent parts from being worn or lost due to looseness.

6. At the end of the running-in period, the machine should be subject to mandatory maintenance, inspection and adjustment, and attention should be paid to the replacement of oil.

2. How to prolong the life of lifting machinery

1. It is necessary to use a thick layer of plastic bags for its overall packaging, that is to say, it is best not to leave the lifting machinery there at any time, and let it be exposed naturally, which is unfavorable, which requires us to Its packaging management is the same as that of a car, which is roughly the use of thick plastic bags to package everything except tires, which can well protect it from damage and interference from the outside world.

2. Carry out special personnel management, arrange special personnel to inspect and find problems on the lifting machinery from time to time, so that you can know in time whether there will be any problems during the placement period, so it is indeed a very important management measure In terms of personnel management, it is best to implement a duty system and a technical management system, which includes both usual management and technical guidance management.

3. Pre-warning and monitoring should be established. This is for the safety of lifting machinery to prevent illegal actions by other people with ulterior motives. You can also use the monitor to understand the storage situation inside, so that you can use the information The improvement of its monitoring.